Help with OEM front coilover and spring measurements | FerrariChat
Buy

Help with OEM front coilover and spring measurements

Discussion in '348/355' started by olive, Aug 2, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. olive

    olive Karting

    Feb 2, 2006
    76
    Paris,France
    Full Name:
    olivier C
    #1 olive, Aug 2, 2023
    Hello guys,

    I'm in the process of ordering stance parts aircups kit to resolve horrible front bumper scraping getting in and out of my parking every time. I need the measurements of a front OEM coilover and spring to confirm fitting compatibility with 355. I would be of tremendous help if I could have the following measurements made with a caliper.It can be measured in inches,I will make the conversion in mm. As shown in picture below,I need 3 measurements: 1)the thickest part of the shaft diameter
    2) the inner diameter of the spring 3) the outer diameter of the spring
    Thanks for your help.

    Cheers from Paris.

    olivier
    Image Unavailable, Please Login
     

Share This Page