HELP with SYSTEM NOT PROGRAMMED error on 458 | FerrariChat

HELP with SYSTEM NOT PROGRAMMED error on 458

Discussion in 'Technical Q&A' started by FERRARI031, Oct 22, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. FERRARI031

    FERRARI031 Rookie

    Jul 12, 2013
    8
    #1 FERRARI031, Oct 22, 2017
    So after a few weeks of not driving (and yes I had the battery tender hooked up) I decided to take it to work yesterday.
    TPMS went on so I added air to the fronts and it did not help that error

    Also getting the TRIANGLE error saying SYSTEM NOT PROGRAMMED

    I disconnected the negative on the batter overnight and this morning reconnected it still no help

    The car runs and drives normally

    Here are the things that I noticed are malfunctioning
    1. TPMS light on and not calibrating
    2. Right screen only on speedometer, no nav, no radio etc
    3. Right side controls do not work and the backlights for them are not even on (radio, nav controls)
    4. Hood and fuel release buttons not functioning


    any help would be greatly appreciated
     
  2. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,387
    The Cold North
    Full Name:
    Tom
    #2 tbakowsky, Oct 23, 2017
    Disconnect the negative again, but don't leave it off for vey long, max 30 seconds. Reconnect, key up and wait for 10-15 seconds, then start..
     
  3. FERRARI031

    FERRARI031 Rookie

    Jul 12, 2013
    8
    #3 FERRARI031, Oct 24, 2017
    I just tried it....Did not help one bit
     
  4. vincep99

    vincep99 Formula 3
    Owner Silver Subscribed

    Jun 8, 2009
    1,931
    #4 vincep99, Oct 24, 2017
    I have had the same and as I recall I changed the battery. How old is your battery?
     
  5. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,239
    Frederick, Maryland
    Full Name:
    Brian Brown
    #5 Motob, Oct 24, 2017
    Take it to the dealership so that they can diagnose the problem and reprogram the system. Is you battery new? if not, replace the battery as well.
     
  6. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,239
    Frederick, Maryland
    Full Name:
    Brian Brown
    #6 Motob, Oct 24, 2017
    Take it to the dealership and have the problem diagnosed by someone with the proper diagnostic computer. You may need to replace the battery. Otherwise you are just guessing as to what the cause it.
     
  7. Nick

    Nick Formula Junior
    Sponsor Professional Ferrari Technician

    Oct 31, 2003
    506
    Full Name:
    Nick Scianna
    #7 Nick, Nov 21, 2017
    You have to do a PROXI program then a PROXI Alignment of the control module. The ONLY tools that does this is the Leonardo or the dealer tool at the dealership.
     

Share This Page