Sign in
Forgot your password?
or Sign up
News

Help!!!!

Discussion in '360/430' started by coolblue, Aug 9, 2004.

  1. coolblue

    coolblue Karting

    May 6, 2004
    217
    #1 coolblue, Aug 9, 2004
    After putting my lights on, the number/license plate lights do not work. I have checked the bulbs and the fuse but both are OK. What next? I have an F355 berlinetta (1995 model)
     

    2. To remove this ad click here.

  2. ART360

    ART360 Guest

    #2 ART360, Aug 9, 2004
    Maybe the prior own disconnected them.

    Art
     
  3. Rifledriver

    Rifledriver Two Time F1 World Champ

    Apr 29, 2004
    27,086
    Austin TX
    Full Name:
    Brian Crall
    #3 Rifledriver, Aug 9, 2004
    If the bumper has been off for any reason they often don't get plugged back in. There is a connector under the bumper on the right side, behind the wheel (one of two). Check that, also gives you a good place to ck for power. The other plug is for the side marker.
     
  4. AntonyR

    AntonyR F1 Veteran

    Apr 12, 2004
    5,328
    Los Angeles
    Full Name:
    Antony
    #4 AntonyR, Aug 9, 2004
    harness could be bad as well and may need a new assembly. Do you have a tester with a light or a voltage meter?

    Antony
     
  5. coolblue

    coolblue Karting

    May 6, 2004
    217
    #5 coolblue, Aug 10, 2004
    Thanks guys...i do have a voltmeter tester and i am about to investigate....wish me luck
     

    6. To remove this ad click here.

  6. coolblue

    coolblue Karting

    May 6, 2004
    217
    #6 coolblue, Aug 10, 2004
    Just investigated, power is going to the lights themselves but they are not coming on. I think it may well be the extensive rust on them that is causing the fault.
     

Share This Page