360 - HELPP!!!! P1619 road bed roughness code. | FerrariChat
Buy

360 HELPP!!!! P1619 road bed roughness code.

Discussion in '360/430' started by Tomcopp1, Aug 10, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tomcopp1

    Tomcopp1 Rookie

    May 28, 2021
    7
    Full Name:
    Thomas Coppinger
    #1 Tomcopp1, Aug 10, 2021
    Hey guys thank you in advance for the help.

    Today took my 1999 360 Modena out for a drive.

    Car was running great then just shut off on me completely turning into a parking lot.


    I have the car a few minutes started right back up then shut off again after about 30 feet.

    Repeated the process and this time the car stayed on.

    The codes that it threw were the following:

    P1160
    P1619


    I was able to clear the p1160 code but the p1619 roadbed roughness (Hi) won’t go away.


    Any help???



    Sent from my iPhone using FerrariChat
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,251
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Aug 10, 2021
    I searched the forum for the P1619 code and found this:

    https://www.ferrarichat.com/forum/threads/cel-on-00-360.331836/#post-140695883

    If it is an acceleration sensor, they are 3 of them. One is a "transverse" sensor, the other two are vertical sensors on the front and rear axles. Not sure how you'd figure out which one is faulty.

    Wiring diagram here if you need it:

    https://www.dropbox.com/t/kuU5wtG6I3hgRLUI

    This may help with sensor location:

    https://www.ferrarichat.com/forum/threads/acceleration-sensors-location.570185/#post-145837161
     
    KC360 FL and Tomcopp1 like this.

Share This Page