Hood Strut Screw? | FerrariChat

Hood Strut Screw?

Discussion in '206/246' started by UroTrash, Sep 4, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. UroTrash

    UroTrash Four Time F1 World Champ Consultant Owner

    Joined:
    Jan 20, 2004
    Messages:
    40,488
    Location:
    Purgatory
    Full Name:
    Clifford Gunboat
    I just can't find, in any of the online catalogs, the little collered screw that is used at the bottom of the front hood strut where the strut attaches to the inside right fender area.

    It might be the same as the one on the rear strut.

    Anyone know who might have these?
     
    UroTrash, Sep 4, 2011
    #1
  2. HMB-Dino

    HMB-Dino Formula 3 Silver Subscribed

    Joined:
    Jun 28, 2010
    Messages:
    2,284
    Location:
    Pebble Beach, CA
    Full Name:
    RonG
    Are you referring to this screw? If so, Superformance has them (look in their Body Fittings section under Enginer Cover Stay) and I still have my old ones. The front lid, engine compartment lid and trunk lid support brackets all use the same screw, with a spring washer on each side of the support bracket (screw-spring washer-bracket-spring washer-body mount-nut)
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    HMB-Dino, Sep 4, 2011
    #2
  3. UroTrash

    UroTrash Four Time F1 World Champ Consultant Owner

    Joined:
    Jan 20, 2004
    Messages:
    40,488
    Location:
    Purgatory
    Full Name:
    Clifford Gunboat
    Yes thats it! Thanks for the referal.


    Addendum: Found and ordered! Thanks.
     
    Last edited: Sep 4, 2011
    UroTrash, Sep 4, 2011
    #3

Share This Page