How do I remove the springs in my 328? | FerrariChat
Buy

How do I remove the springs in my 328?

Discussion in 'Technical Q&A' started by donald, Jan 26, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. donald

    donald Karting

    Aug 11, 2004
    197
    Dallas, Texas
    Full Name:
    Don
    #1 donald, Jan 26, 2005
    I am referring to the springs in the door pockets. Mine need to be replaced or adjusted. Do I need to take off the entire door panel?

    THANKS!
     
  2. Roryferrari

    Roryferrari Formula Junior

    Apr 28, 2004
    259
    San Jose
    Full Name:
    Dave Bell
    #2 Roryferrari, Jan 27, 2005
    As I recall, you need to pull the door panel. You'll need to pull the pocket away from the backside of the door, it's glued. If the spring is not broken, you can spin the entire assy 1 turn to tighten it. Then re-glue pocket. I don't know if it is possible to do this without pulling the door off.
     

Share This Page