How to Change the Wiper Blades on 2010 California | FerrariChat

How to Change the Wiper Blades on 2010 California

Discussion in 'California/Portofino/Roma' started by Makenakraus21, Apr 10, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Makenakraus21

    Makenakraus21 Rookie

    Feb 22, 2025
    3
    New York City, NY
    Hi everyone,

    I was wondering if anyone knew how to change the wiper blades on a 2010 California? I assume there is a wiper change mode where the car will put them in a vertical position to be changed but I can't seem to figure it out.

    Any suggestions would be greatly appreciated, thanks!
     
  2. Dem

    Dem Formula 3

    Mar 21, 2004
    1,029
    London
    Full Name:
    Dem
    Same question here! I've worked for DENSO for 30 years so have obtained a new set, but not sure if there is a park position for the wipers (by a specific ignition switch / wiper switch combo). Ironically, I managed the application engineering for JLR wiper projects about 10 years ago. My memory isn't what it was.... Worst case I'll ask someone in the Italian office next week if they can remember or dig up any info for this old project.
     
  3. Dem

    Dem Formula 3

    Mar 21, 2004
    1,029
    London
    Full Name:
    Dem
    So, no need for a park or service position to change the wiper blades. There's enough movement in the arm before it hits the bonnet to give enough space. However...

    Passenger side all good. Driver's side longer than the blade currently fitted and so interferes with the passenger blade.

    Is nothing simple with these cars...

    I'll get in touch with the wiper team in the Italian office and see if they have any clue.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     

Share This Page