How to clean models | FerrariChat
Buy

How to clean models

Discussion in 'Collectables, Literature, & Models' started by Boink, Oct 23, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Boink

    Boink Formula 3

    Jan 2, 2007
    2,428
    Delft
    Full Name:
    Ruud
    #1 Boink, Oct 23, 2008
    I have seriously no idea how to clean the greasy fingers on my models. But also spots of dryed water are a crime to remove. Any tips?
     
  2. desire308

    desire308 Formula 3

    Oct 19, 2007
    1,433
    Florida
    Full Name:
    Peter W
    #2 desire308, Oct 23, 2008
    Last edited: Oct 23, 2008
    I small amount of alcohol on a cotton rag or q tip will work.

    A mild plastic polish will get rid of water spots.
     
  3. DMC308

    DMC308 F1 Rookie

    Aug 19, 2006
    2,574
    Seattle/Noosa
    Full Name:
    D
    #3 DMC308, Oct 23, 2008
  4. sweets

    sweets Karting

    Oct 3, 2004
    173
    Markham
    Full Name:
    Anthony
    #4 sweets, Oct 23, 2008
    As far as cleaning is concerned, I use a very soft Micro fibre cloth. This cleans and is VERY GENTLE as well. On another note,on a tip from a friend, I went out and purchased something called "Conservators Wax" This is Museum grade wax. I've applied it to my models and WOW!!! what a shine. and smooth as Glass. Especially my Millenium Chrome Testarossa.
     
  5. eric t

    eric t Karting

    Sep 23, 2007
    98
    #5 eric t, Oct 25, 2008
    Whatever you do, first get rid of any dust.
    I use a large blower/brush that photographers use to clean their lenses.
    Available at most good camera stores.
     
  6. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,973
    MD and NE
    Full Name:
    Robbie
    #6 285ferrari, Oct 25, 2008
    Any quik detailer used for cars works well...
     
  7. Martin308GTB

    Martin308GTB F1 Rookie

    Jan 22, 2003
    4,263
    Black Forest Germany
    Full Name:
    Martin N.
    #7 Martin308GTB, Oct 25, 2008
    this may sound crude, but I actually perform it that way and my modelcars come out like new.
    I use a VERY soft make-up brush, lots of water and a little bit of dishwashing detergent. I gently clean the 1:18 AND 1:43 cars with this method. After a thorough rinsing I blow them dry in my 1:1 workshop with compressed air ( low pressure, sensitive control gun ).

    Of course this method requires caution not to break or blow away tiny parts, but like said, after such treatment the models are like new.

    Best Regards from Germany

    Martin
     

Share This Page