How to remove 348 rear rotors | FerrariChat
Buy

How to remove 348 rear rotors

Discussion in '348/355' started by emailben, Aug 12, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. emailben

    emailben Karting

    Feb 10, 2012
    195
    San Jose, CA
    #1 emailben, Aug 12, 2012
    I am trying to adjustment my handbrake, but I think the drum pads inside the rear rotor must worn out. I cannot find the screws to remove the rear rotors. Please help.
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,614
    The Brickyard
    Full Name:
    The Bad Guy
    #2 ernie, Aug 12, 2012
    You need to unscrew the two little "mounting"'prongs. Those are what hold the rotor to the hub.
     
  3. tcannon

    tcannon Formula 3

    Feb 18, 2009
    1,763
    Norman, OK
    Full Name:
    Todd Cannon
    #3 tcannon, Aug 12, 2012
    Last edited by a moderator: Sep 7, 2017
    Here is a pic that shows one of the two alignment pins partially unscrewed. Remove both of them to remove the disc. You may need to use a dead blow mallet to tap on the back side of the disc to get it off. ;)
    Image Unavailable, Please Login
     
  4. 348Jeff

    348Jeff Formula 3

    Oct 25, 2011
    1,531
    UK
    Full Name:
    Jeff
    #4 348Jeff, Aug 13, 2012
  5. emailben

    emailben Karting

    Feb 10, 2012
    195
    San Jose, CA
    #5 emailben, Aug 14, 2012
    I removed those two pins when I mount the Hill Engineer spacers. Is there a risk of the disk coming off withouth those two pins?
     
  6. 348Jeff

    348Jeff Formula 3

    Oct 25, 2011
    1,531
    UK
    Full Name:
    Jeff
    #6 348Jeff, Aug 14, 2012
    The wheel bolt isnt bolted to the brake discs - it just passes through it then is bolted into the hub so no danger of that (its a bit like a sandwich with the disc as the filling)
     

Share This Page