How to remove front bumper and splitter? | FerrariChat

How to remove front bumper and splitter?

Discussion in '308/328' started by Austin Newman, Aug 22, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Austin Newman

    Austin Newman Karting

    Dec 18, 2019
    229
    Memphis
    Full Name:
    Austin Newman
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,824
    Cerritos, CA.
    Full Name:
    Mike
    What model are you referring to?
     
  3. Austin Newman

    Austin Newman Karting

    Dec 18, 2019
    229
    Memphis
    Full Name:
    Austin Newman
  4. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    By "splitter" I'm assuming that you mean the body part below the front bumper. The parts book shows it held on by a few screws. I've had thoughts of putting on the euro version on and off since I've owned it. I'm afraid mine is painted in place and pulling it off will have paint implications. I'm interested to see what responses are like and if it is really that easy.

    I did take this off on my GT4 and it was pretty much that easy. My only surprise was that there were a rusty pair of vise grips instead of a screw in one place. But the way it mates to the body is really different and not visible unless you are under the car.
     

Share This Page