How to remove shift knob on Diablo? | FerrariChat

How to remove shift knob on Diablo?

Discussion in 'LamborghiniChat.com' started by KENCO, Dec 5, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KENCO

    KENCO Formula 3

    Joined:
    Nov 1, 2006
    Messages:
    2,396
    Location:
    FL
    Full Name:
    KJG
    How does it come off? I have to re-finish the gate plate underneath, so I nead to remove the shift knob, 92 Diablo.
     
    KENCO, Dec 5, 2007
    #1
  2. Scaledetails

    Scaledetails F1 Rookie

    Joined:
    Nov 19, 2003
    Messages:
    4,211
    Location:
    Daytona Beach, FL
    Full Name:
    Stephane
    It should unscrew counterclockwise
     
    Scaledetails, Dec 5, 2007
    #2
  3. KENCO

    KENCO Formula 3

    Joined:
    Nov 1, 2006
    Messages:
    2,396
    Location:
    FL
    Full Name:
    KJG
    I'll try, thanks!
     
    KENCO, Dec 5, 2007
    #3
  4. KENCO

    KENCO Formula 3

    Joined:
    Nov 1, 2006
    Messages:
    2,396
    Location:
    FL
    Full Name:
    KJG
    OK, will not unscrew counter clockwise.

    There is a collar at the bottom that unscrews from the shift knob and then the knob can be removed.
     
    KENCO, Dec 5, 2007
    #4
  5. Scaledetails

    Scaledetails F1 Rookie

    Joined:
    Nov 19, 2003
    Messages:
    4,211
    Location:
    Daytona Beach, FL
    Full Name:
    Stephane
    Sorry Ken, I was just going by memory on my 92', as my 91 currently has an aftermarket momo knob with the bottom collar. Glad you did figure it out.
     
    Scaledetails, Dec 5, 2007
    #5
  6. KENCO

    KENCO Formula 3

    Joined:
    Nov 1, 2006
    Messages:
    2,396
    Location:
    FL
    Full Name:
    KJG
    No problem, I think mine is aftermarket also, it is contoured, not just a ball or rounded.
     
    KENCO, Dec 6, 2007
    #6
  7. Arvin Grajau

    Arvin Grajau Seven Time F1 World Champ

    Joined:
    Jun 7, 2006
    Messages:
    78,325
    Location:
    Wurundjeri man.
    Full Name:
    Arvin Grajau
    eat it
     
    Arvin Grajau, Dec 6, 2007
    #7
  8. KENCO

    KENCO Formula 3

    Joined:
    Nov 1, 2006
    Messages:
    2,396
    Location:
    FL
    Full Name:
    KJG
    ?
     
    KENCO, Dec 6, 2007
    #8
  9. IceDemon

    IceDemon Rookie

    Joined:
    May 17, 2006
    Messages:
    30
    Location:
    Lutz, FL
    Those shift knobs are hard and chewy, so I wouldn't advice this. It's better to lick it off. If it tastes bad, put some maple suryp on it or something.
     
    IceDemon, Dec 6, 2007
    #9
  10. BULL RUN

    BULL RUN Formula 3

    Joined:
    Dec 18, 2004
    Messages:
    1,684
    Look for two, maybe three small allen screws
     
    BULL RUN, Dec 9, 2007
    #10
  11. Pantera

    Pantera F1 Rookie

    Joined:
    Nov 6, 2004
    Messages:
    4,479
    Those things are as hard as the Captain crunch cereal man! you trying to make him smash in his teeth or choke?.
     
    Pantera, Dec 9, 2007
    #11

Share This Page