How to remove the screws of the suspension levers? | FerrariChat
Buy

How to remove the screws of the suspension levers?

Discussion in 'Technical Q&A' started by wiltink, Aug 16, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. wiltink

    wiltink Rookie

    Sep 6, 2009
    11
    #1 wiltink, Aug 16, 2011
    Can anyone tell me how to remove the body-side screws of the suspension levers?
    I have to replace the flamblocks, but one of the screws is corroded in the inner bush of the flamblock.
     
  2. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,221
    Twin Cities
    Full Name:
    Tim Keseluk
    #2 2NA, Aug 16, 2011
    Ford, Chevy, Hupmobile? ;)

    Complete your profile.
     
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,573
    San Carlos, CA
    Full Name:
    Mitchell Le
    #3 yelcab, Aug 16, 2011
    308/328 have the suspension levers mounted to the frame with 2 long bolts and 2 nuts. The mounting points on the frame are 2 small fork-like pieces that have a long bolt inserted through to the other side of the frame.

    Two ways to do this.

    1) remove the bolts holding the small forks to the frame and remove the suspension levers with the small forks attached, then remove them on the bench.

    2) use large open-ended or closed-ended wrenches to remove the long bolts/nuts from the suspension lever on the body side.
     

Share This Page