Sold HRE 545 18” Wheels

I bought these a few years ago for use on my 308 GTS, but despite allegedly coming off a 308, they wouldn’t fit, at least not without some spacers. They have the correct 5x108 bolt pattern, but according to the numbers stamped on the back (which I didn’t know how to decode when I bought them), the offset is +47mm (front and rear) whereas the standard 308 wheels have an offset of +11mm. I’m not sure what other Ferrari models these might fit. The front wheels are stamped 5S18P477015, which breaks down as:

5S – 5x108 wheel bolt pattern

18 – 18” wheel diameter

P47 - +47mm offset

70 – 7.0” inner barrel

15 – 1.5” outer lip (for a total width of 8.5”)

The rears are stamped 5S18P477520, so the same as the fronts except with a 7.5” inner barrel and outer lip of 2.0” for a total width of 9.5”. I am not an HRE expert by any means so if anyone has additional information or any corrections, they are most welcome.

Overall the wheels are in very good condition with just some minor defects in the clear coat of the center sections and some very light corrosion on the outer rims which I think would clean up with some light polishing.

The tire sizes are 225/40ZR18 for the front and 255/35/ZR18 on the rear. The tires have plenty of tread but are old and dry and certainly in need of replacement. I can leave them on for test-fitting or remove them for less expensive shipping (which will be at the buyer’s expense; local pickup in Rockville, MD would also be fine), whichever the buyer prefers.

Asking $2400 or best offer.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Thanks for the pics, Lucas. I think the wheels look great on those cars, if I do say so myself. I also did a little research and I'm pretty sure these would also work on a Mondial, 348, or 355, but not a 550.

 

Unfortunately my caliper won't fit in there to measure precisely, but using a ruler it's 67 or 68mm.