Sold HRE 545 19" X 12" & 8.5" 3 PIECE ALLOY WHEELS

For Ferrari 550-575 Maranello and other 5 x 108 Bolt Pattern Cars (See below for Wheel Specs)
Very nice condition! Exceptionally Clean!
Checked Professionally to assure Round and True.
Includes:
4-Original version Center Caps (no cracks)
4-Valve Stems
20-Lug bolts (some small chrome chips)
2-Protective Lug Bolt Sockets-17mm x 1/2" drive. 1 is longer to allow for easier access for deep wheels.
1-PVC Cap Removal Tool to assure even pressure on backside of cap perimeter when pushing out.
Asking $2,750 U.S. Inquire for Shipping Costs

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

Image Unavailable, Please Login

View attachment 3094351

HRE 545 12J x 19

Wheel
Dimensions mm Inches

Width 304.80 12.00

Lip Width 12.70 0.50

Overall
Width 330.20 13.00

OFFSET 28.57 1.12

BACKSPACE 193.67 7.62

Frontspace 136.53 5.38

Weight 29 lb. 11 oz. VS. 19” BBS Modular @ 32 lb. 4 oz. (10.5J x 19”)

HRE 545 8.5J x 19

Wheel
Dimensions mm Inches

Width 215.90 8.50

Lip Width 12.70 0.50

Overall
Width 241.30 9.50

OFFSET 25.40 1.00

BACKSPACE 1 146.05 5.75

Frontspace 95.25 3.75

Weight 27 lb. 13 oz. VS. 19” BBS Modular @ 30 lb. 2 oz. (8.5J x 19”)
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I cleaned up the Wheel Dimensions and Specifications for easier viewing.

 

Thanks for your great insight Carbonsmith. I wish it was that simple in my case.
I've actually known the car since 2004 which had the HRE's on then.
When I purchased the car in June of 2012, the first thing I did was to toss the old Pirelli 355-25-19's and the 255-35-19's the car was running. They were way out of date and as it turned out the 355's were no longer available from Pirelli, so based on Taz's recommendations here on F-chat, I converted over to MPSS.
Looking at the stampings and not being able to make sense of them at that time, I called Vince Borja who was running the HRE Service Dept.
He also gave me the coding which obviously did not line up since I knew I had 19's not 18's.
He said if a set centers had been stamped with the code for a set of 18" x 10" Straight Lip wheels with 8" inner barrels and 2" outer lips those numbers would coincide but somewhere in the assembly process someone must have changed the spec from an 18" Straight Lip to a 19" Step Lip in addition to the inner barrel and outer lip dimensions to end up with set of 12" Rear and 8.5" Front x 19" wheels.
When I posted the wheels for sale, I wanted to show a close up of how clean the wheels are.
Knowing someone with a keen eye such as yours would pick up on the HRE Code, I hard measured everything myself and backed it up by using one of the Wheel Offset/Backspace Calculators on the internet.
At the risk of putting a lot of superfluous info into the Specs, I wanted to make absolutely sure I represented the wheels in the most accurate way I could.
Thanks for the great info. Good stuff for a lot of F-Chatters!

 

Wheels Sold to Manda Racing! Thanks very much to Carbon Smith for your input and valuable guidance!

 

Great, but wow they told me Monday.
Send me a photo when you’re all set up.
Happy Easter!
Kent