For Sale HRE Palace (505) Wheel/tire Set

Set of four HRE Palace (505) 3pc wheel/tire set.
Four 3pc wheels, 8x16 fronts, 9x16 rears with 225/50-16 and 245/50-16 BFG g-force comp-2 A/S z rated.
Wheels have the 5x108 five lug pcd.
Wheels were rebuilt in 2018 by WRS in Santa Ana. Wheels are painted and not powder coated so they easily be stripped and repainted or polished. Wheels do jot have center caps but were modified with a trim ring to hide the counterbore used for the wheel caps. Wheels run true and balance easily. They are sealed and show no leakage in the time since the rebuild.
Tires are 3 yrs old and have maybe a few thousand total miles on them.
Special center caps were made for the centers to replace the missing HRE center caps which are near impossible to find.
$4500 plus shipping
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Good question. Ill pull them out at daylight and get some numbers.

 

Had them on my 308 GTSi for a few years.
No rubbing on the fronts at all. Slight rub on the outside edge on the rears. Center hubs thick enough to remove at least 1/4” and move offset slightly inside. Ive got another set of HRE 505’s that have a thinner rear center hub and they do not rub. Something i was going to do if i kept them. Offsets are affected by the inside and outside barrels used so they im not sure if they have the them. Pictures of them mounted on my 308 shown. I purchased these from a fellow fchatter out of Florida years ago.
I went to a more stock setup with the Superformance wheels which I like the look of.

 

Please ignore the badges theyre magnetic. Ive also got a set of polished 505’s done by Al Reed long ago that im thinking about selling.

Image Unavailable, Please Login

 

Checked the inside of the wheels and can verify that no offsets are identified. I suspect that it is because of the combinations of barrels that can be used to make the wheel size that you want. I can say that the center hubs on these are much thicker than the hubs on the other set that I have above and would allow for a certain amount of stock removal to adjust offset. I would only do that on the rears as the fronts worked fine on my car. Should note that the BFG g-forces are also a pretty 'beefy' tire and somewhat larger than the corresponding sizes of other brands. Great tire for the money in my opinion.

Image Unavailable, Please Login