I need this. | FerrariChat
Buy

I need this.

Discussion in '206/246' started by toto70_0, Dec 26, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. toto70_0

    toto70_0 F1 Rookie

    Sep 14, 2004
    3,852
    NETHERLANDS
    #1 toto70_0, Dec 26, 2010
    Last edited by a moderator: Sep 7, 2017
    It seems that we have lost this part from the door of my Dino, anybody out there know where to get them any other solutions. it is steel aprt which is screwed into the door corner to keep the rubber in its place.
    Image Unavailable, Please Login
     
  2. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,286
    E.S.
    Full Name:
    Alberto
    #2 swift53, Dec 26, 2010
    Last edited: Dec 26, 2010
    Toto, cannot really make out what you need, stainless trim or sheetmetal. If sheetmetal, I can make it for you. Please try to post/send a better/more descriptive photo, or a reference from the Dino catalog. I do see the door hinge there, yet not very clear.
    Happy Holidays!
    Regards, Alberto
     
  3. Dino Club Germany

    Dino Club Germany Formula Junior

    Nov 10, 2008
    549
    Germany
    Full Name:
    N. Schumacher
    #3 Dino Club Germany, Dec 26, 2010
    I thnik part No 39 on the link is what is needed.
    The small piece is attached with (2?) screws to the door panel
    to fix the rubber. I don´t think you can buy it somewhere.
    You will have to build it..

    [​IMG]

    Regards
    Nicolai
     
  4. toto70_0

    toto70_0 F1 Rookie

    Sep 14, 2004
    3,852
    NETHERLANDS
    #4 toto70_0, Dec 26, 2010
    Last edited by a moderator: Sep 7, 2017
    It is not chromeplated part but the painted steel part to keep the rubber on its place.
    Thanks to a F-chatter who has restored a beautiful GTS some better pictures.
    I think no 39 from tavola 109 is the chrome part.
    1st picture: The part which I need, is to the left, where the rubber is already out and screwed on the door with 3 screws.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  5. Dino Club Germany

    Dino Club Germany Formula Junior

    Nov 10, 2008
    549
    Germany
    Full Name:
    N. Schumacher
    #5 Dino Club Germany, Dec 26, 2010
    The chrome part is only existing on a GTS and that´s why No.39 should be the right one (picure shows a "GT").
    But your first picture is better than what I found to post,
    but that is exactly what I meant with my statement.
     
  6. jselevan

    jselevan Formula 3

    Nov 2, 2003
    1,873
    #6 jselevan, Dec 26, 2010
    I need two as well - they are different on each side - mirror images.

    I made a pair with thin aluminum sheet metal, but a poor job it was. Alberto - I will contribute to the fabrication of a set of these. They sit at the top of the door, and as toto70 mentioned, they hold the rubber in place.

    Jim S.
     
  7. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,649
    #7 racerboy9, Dec 26, 2010
    We remade those on my GT. Very easy with a bead roller.
     
  8. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,286
    E.S.
    Full Name:
    Alberto
    #8 swift53, Dec 27, 2010
    I checked, and we already made a set copied from another Dino as mine was also missing them.
    Please let me know how many are needed and I will gladly arrange the manufacture.
    They would be available in January (end).

    Regards, Alberto
     
  9. toto70_0

    toto70_0 F1 Rookie

    Sep 14, 2004
    3,852
    NETHERLANDS
    #9 toto70_0, Dec 27, 2010
    I found them today, the original ones, somebody misplaced them,
    Thanks to all.
     

Share This Page