iForged Classics 3 Pc. with Pirelli P Zero Rosso Tires for F360 and F430 | FerrariChat

iForged Classics 3 Pc. with Pirelli P Zero Rosso Tires for F360 and F430

Discussion in '360/430' started by chrisjjones, Mar 13, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chrisjjones

    chrisjjones Rookie

    May 14, 2004
    17
    Full Name:
    Chris Jones
    #1 chrisjjones, Mar 13, 2007
    Last edited by a moderator: Sep 7, 2017
    Selling my iForged Classics finished in brilliant silver with chrome lip. Tires are Pirelli P Zero Rosso's 255/30/19 front and 355/25/19 rear tires.

    Approximately 100 miles on wheels and tires

    Will fit F360 and F430 without ceramic brake upgraded. Located in Newport Beach.

    $4,000

    See add in FerrariAds.com

    Spec's:

    iForged Classic 3 PC.Modular with brilliant silver centers and chrome lip
    19x9 Front 3" lip
    19x13 Rear 4" lip
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. joe@scottsdaleexoticcarcl

    joe@scottsdaleexoticcarcl Formula Junior

    May 1, 2006
    271
    N. Scottsdale AZ
    Full Name:
    Joe
    Great looking wheels!
    Can you get a 13" wheel with a 355 on the back of a 360 without altering the car?
     
  3. racerdj

    racerdj F1 Veteran
    Owner

    Jan 19, 2003
    6,952
    Indianapolis
    Full Name:
    DJS
    Reason for selling?
     
  4. chrisjjones

    chrisjjones Rookie

    May 14, 2004
    17
    Full Name:
    Chris Jones
    The wheels were on my 360 spider.

    The rear wheels fit with no modification to the car while the front wheels required the fenders to be rolled or ground down.

    I am selling as the buyer of my 360 spider wanted the stock wheels, and I intend to keep the stock wheels on my 430 spider.
     
  5. Brav

    Brav Formula 3

    Nov 20, 2005
    1,029
    OC, Rome
    Full Name:
    Chris
    Couldnt tell you if you could or not, but that is nearing the point of "unnecessary" where it would degrade performance.. you would completely change the scrub radius, gemometry, weight, tire patch pressure, etc. Most likely you would lose handling. Tramlining, hydroplaning, understeer, increased unsprung weight, etc...

    360s dont have much torque, dont need all that tire. But if you want to look cool and just drive around town, and not drive at the limt, so be it :)

    Of course, I could be completely wrong..
     

Share This Page