ignition switch246 dino | FerrariChat

ignition switch246 dino

Discussion in '206/246' started by possum, Oct 6, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. possum

    possum Formula Junior

    Sep 27, 2008
    307
    australia
    Full Name:
    johnno
    Would anybody have a rear view of the wiring of the ignition switch I seem to have got my wires crossed,3 wires green and white ok red not sure.
     
  2. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
  3. John Corbani

    John Corbani Formula 3
    Honorary Owner

    May 5, 2005
    1,153
    Santa Barbara, CA
    Full Name:
    John Corbani
    #3 John Corbani, Oct 6, 2008
    Last edited: Oct 6, 2008
    Covered this in a couple of Sagas. Might search. Red is power, White is Starter Solonoid, Blue is Ignition, Black is everything else. I have a '72 US GT. You might have other colors. Ignition switch has two terminals in line near one of the screws. Those two terminals are power in, Red. Use either one. Connected together inside switch. Other one is for radio clock power, etc.
     
  4. possum

    possum Formula Junior

    Sep 27, 2008
    307
    australia
    Full Name:
    johnno
    A big thankyou to dinodriver and John,I checked out johns drawing,tried to take a picture with my mobile phone but opted for a shaving mirror and johns drawing and I figured it out I had power to the white lead,which I unfortunately disconnected ,the red was connected and the other colour was green.
     
  5. jselevan

    jselevan Formula 3

    Nov 2, 2003
    1,873
    It appears that gravity is effecting you guys down-under. Please read the post by djh4570 (Brain Fade 2) from New Zealand, also having trouble with electrical issues. It may be that his wire fell up as well.

    Jim S.
     

Share This Page