Inner wing inspection panels - what type of fixing? | FerrariChat
Buy

Inner wing inspection panels - what type of fixing?

Discussion in '206/246' started by simonc, Mar 18, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. simonc

    simonc Formula Junior

    Nov 1, 2003
    884
    Herfordshire, UK
    Full Name:
    Simon Campbell
    #1 simonc, Mar 18, 2014
    I am referring to the removable fibreglass panels that can be unbolted from the inner wings for access to items such as the oil-filter. Can anyone tell me how these panels should be held on? Mine have stainless M5 bolts with plain washers and I know these are incorrect but don't know what the original fixings would have been. Can anyone advise? Pictures and an online supply source would be great.
     
  2. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,669
    #2 racerboy9, Mar 18, 2014
    I think that what you have is correct except the bolts and washers were not stainless steel. Just the bolts were plated black and the washers were probably zinc plated.
     

Share This Page