Inside Contact at Michelotto? | FerrariChat

Inside Contact at Michelotto?

Discussion in '288GTO/F40/F50/Enzo/LaFerrari/F80' started by bcwawright, Mar 3, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Does anyone have an inside contact at Michelotto?....I'm needing to source a T/O bearing for one of Michelotto's lightweight flywheel clutch assemblies they produced for the 355GT(borrowed from the 348LM) project in 94/95 that got canned when the 333 began developement.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    bcwawright, Mar 3, 2011
    #1
  2. Tenney

    Tenney F1 Rookie Consultant

    Joined:
    Feb 21, 2001
    Messages:
    4,289
    Tenney, Mar 3, 2011
    #2
  3. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Thanks but I already have all the email addresses and department head names.....

    What I wanted was if someone had a working relationship/contact inside Michelotto to find out which mfg and pn for the T/O bearing that was used on the 355GT.
     
    bcwawright, Mar 3, 2011
    #3
  4. ivo73

    ivo73 F1 Rookie Consultant

    Joined:
    Mar 3, 2005
    Messages:
    3,476
    Location:
    Switzerland
    Full Name:
    Ivo Pucci
    Bruce,

    call Cristiano Michelotto ..If he isn't busy or somewhere on the tracks ,he will sure help you .

    regards
    Ivo
     
    ivo73, Mar 4, 2011
    #4
  5. bcwawright

    bcwawright F1 Veteran

    Joined:
    Jul 8, 2006
    Messages:
    5,234
    Location:
    Georgia
    Full Name:
    Bruce
    Thanks Ivo...I'll contact on moday and see if he can help me out.

    Regards
     
    bcwawright, Mar 4, 2011
    #5

Share This Page