Installing 246 cam shafts | FerrariChat

Installing 246 cam shafts

Discussion in '206/246' started by yakxx21, Feb 4, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yakxx21

    yakxx21 Karting

    Joined:
    Jun 29, 2013
    Messages:
    230
    I am now refitting my camshafts and wonder if there is a step by step explanation on the site.
    A I understand it , it's TDC on number three and then line up static 10 degree mark ( or is it 9 or 6 ..?) and the cam paint marks should line up with the cap marks and then I adjust chain tension. Is that it .
    Anything else ?

    Any advise thanks
     
    yakxx21, Feb 4, 2014
    #1
  2. 2dinos

    2dinos F1 Rookie

    Joined:
    Jan 13, 2007
    Messages:
    3,046
    FWIW: I was told to use .050" and a dial indicator & degree wheel.
     
    2dinos, Feb 5, 2014
    #2
  3. yakxx21

    yakxx21 Karting

    Joined:
    Jun 29, 2013
    Messages:
    230
    Appreciate but dont understand...50 Thou for what ? If I convert inches to Angle I would need to know Radius of degree wheel....
    any more info ...
     
    yakxx21, Feb 5, 2014
    #3
  4. daviekj

    daviekj Formula Junior Silver Subscribed

    Joined:
    May 9, 2008
    Messages:
    486
    Location:
    UK
    daviekj, Feb 5, 2014
    #4

Share This Page