installing a JVC GPS | FerrariChat
Buy

installing a JVC GPS

Discussion in '360/430' started by creedy, Aug 3, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. creedy

    creedy Rookie

    Jun 25, 2007
    18
    Montreal Canada
    #1 creedy, Aug 3, 2007
    I am planning on installing JVC GPS in dash unit in my 2003 360 spyder. It says it needs a speed sensor wire and a backup wire hook up. The back up wire I guess is not big woop as I can pick up a reverse light but the speed sensor and parking break wire has me freaked.
    Has anyone out there done this already? Is there some great link showing the install? I did similar on my M3 and was lucky enough to follow an amazingly well photo documented install post.
    Lastly where does one put the GPS and Sat antenna. Is the dash aluminum underneath or is it fibreglass (that way I cold hide it under the leather of the dash.
    Many thanks in advance!
     
  2. jir591

    jir591 Karting

    Aug 17, 2005
    237
    Weston, Florida
    #2 jir591, Aug 3, 2007
    When I had my 360, I spent a lot of time trying to find the speed sensor wire. I believe it is behind the dashboard. Do a search and I think you can find the posts.
     
  3. k-diddy

    k-diddy Formula Junior

    Oct 29, 2004
    530
    #3 k-diddy, Aug 3, 2007
    Speed sensor wire is on the factory radio harness.
     

Share This Page