Installing Brake Light Module

I purchased on of Stef's brake light module and a pair of re LEDs. The module will stop any F1 lights due to the monitoring of the brake light circuit (another quirky Ferrari design) with the use of LEDs.
Photo #1 The kit with the module and a pair of red LEDs
Photo #2 Install LED in place of the OEM incandescent bulb
Photo #3 Plug the female connector from the module into the wiring harness connector.
Photo #4 The finished install -- I probably need to keep that module away from the hot F1 pump.
Install second LED in the drivers side lamp housing and we're done. Very much plug-n-play and no F1 lights as well as faster and brighter LEDs.
Alan
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Russ
Yes everything from Stef is top quality with OEM type connectors. I have cheapo LEDs for the tail lights as there is no electronic involvement as the turn signal and brake lights do.
I have about 6 of these if anyone is interested -- just PM or email me.
Alan