Interior door handle left side

Check Mostly British; in spite of the name, they have 3 or 4 400's they are parting out. They ask HIGH prices.
Image Unavailable, Please Login
Ken

 

Note;
With a little mechanical work, a left can be turned into a right and vice versa.

 

There used to be some repro on ebay. Slightly more polished, but milled out of a solid block.

https://www.ferrarichat.com/forum/threads/400-inner-door-handle-broken-can-anybody-help.636821/#post-147730481

 

Mondials 8, QV have the same door level, so you can look for one of these also.

 

Possibly this used assembly:

https://www.partscollector.com/en/mostraArticolo.php?IDArticolo=18052

 

• Is'nt this the same inner door lever ?! This is from a mondial 8/QV....could be the dimensions are different.
• The some Alfa Spider also have the same outer door lever (more or less..)

Image Unavailable, Please Login

 

The Fiat 130 Coupe has same interior handle although they are mostly shiny and not matte. The 130 Berlina seems to have a variant of same type with just the opening handle and without the locking handle. Can't guarantee they are equal though.

Coupe :
Image Unavailable, Please Login

Berlina :
Image Unavailable, Please Login

 

I know a chap that has recently broken a 400. He’s keeping the engine, gearbox and chassis for a new build, but most other bits are available. It’s here in the U.K. but I imagine he’ll ship to the USA (or elsewhere). The website is hartgrovegarage.co.uk and ask for Tim. Feel free to mention my name (Ewan)

 

How much did he get you for the part? Prices have soared since the original owner passed away a couple of years ago. His wife still does the billing and shipping. I think Dave worked there for years. I went there 10+ years ago and it is/was an amazing shop restoring Rolls and Jags.

 

Had this happen to my 412i earlier this year. Got a new part via the folks at Autosport Design in Long Island - if I understood correctly, it was 3D printed in aluminum by a company in Europe. My new part looked exactly like the one in aluminum from Ital-Spares cited above, so perhaps.... The new part was far more robust than the original, particularly around the little lever that actuates the rod that open the latch, which is where mine snapped. It was "overbuilt" enough that I could not install it with the little hairpin spring that is supposed to assist with closing the handle, but this proved to be unneeded as the door latch itself will easily pull the handle to the closed position. The finish on the exterior portion of the new handle was more polished in comparison the brushed texture of the original.

 

Good day All,

Just a heads up that the outer door handles are not necessarily interchangeable between Ferrari models or those from other cars like Alfas. They may "look" the same, but it is the details that could cause issues. Below is a thread I posted a while back where I bought some outer door handles that were marketed as being compatible between the 365/400 models, but I found many differences which made them unusable.

https://www.ferrarichat.com/forum/threads/be-aware-of-the-new-365gt4-2-2-400-series-door-handles-being-sold.487081/

I never bought and compared handles from Alfas, etc and so they may or may not be compatible. However, I just wanted to remind everyone that there can be differences that are not immediately obvious.

Cheers,

Sam