Interior help | FerrariChat

Interior help

Discussion in '348/355' started by foxmul, Sep 3, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. foxmul

    foxmul Karting

    Mar 14, 2008
    100
    Millington, NJ
    Full Name:
    Joseph Molino
    #1 foxmul, Sep 3, 2009
    Last edited by a moderator: Sep 7, 2017
  2. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,977
    MD and NE
    Full Name:
    Robbie
    Maybe a screw in the firewall?
     
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

  4. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    Yes, there are two threaded studs pointing downwards from the angle piece, and you have to remove the cover panels for the Motronic ECU's and search upwards until you find the little nuts - not real easy to find, but they're there. Once the nuts and washers are off, the trim piece lifts straight up and off. If you're just tucking the carpet into place, you might not need to take the piece off, just loosen it.
     
  5. foxmul

    foxmul Karting

    Mar 14, 2008
    100
    Millington, NJ
    Full Name:
    Joseph Molino
    Wow, those little buggers. Thanks so much guys.
     

Share This Page