Interior lamp switch door blade rubber knob | FerrariChat

Interior lamp switch door blade rubber knob

Discussion in '365 GT4 2+2/400/412' started by sebackman, Oct 21, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sebackman

    sebackman Karting

    May 19, 2010
    138
    Europe
    #1 sebackman, Oct 21, 2020
    Hi,

    Could someone with a 400i please measure the correct height of the rubber knob/button that sits on the door blade and pushes the door interior light switch in the body.

    I just have two small holes in the door blade. I

    t has not been a problem as the bulbs in the red door convenience lights were broken before. Now with new LED's the are on all the time but goes off when pushing the switch.

    Kind regards
    //Rob
     
  2. Al Campbell

    Al Campbell Formula Junior
    Owner Silver Subscribed

    Nov 22, 2013
    573
    Australia
    #2 Al Campbell, Oct 21, 2020
  3. sebackman

    sebackman Karting

    May 19, 2010
    138
    Europe
    #3 sebackman, Oct 22, 2020
    Brilliant!

    Thank you very much Al.

    Now I can get them from my local shop.

    -Will report back when I get it settled

    Kind regards
    //Rob
     

Share This Page