Just confirming the correct OIL bolt to remove. (in the middle of oil change) | FerrariChat

Just confirming the correct OIL bolt to remove. (in the middle of oil change)

Discussion in '360/430' started by Falcon Wing, Apr 1, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Falcon Wing

    Falcon Wing Formula 3

    Aug 4, 2010
    1,294
    Colorado Springs
    #1 Falcon Wing, Apr 1, 2014
    Last edited by a moderator: Sep 7, 2017
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,454
    Dublin, Ireland
    Full Name:
    Greg
    Yes, that's correct but it's only #1 of 2. There's another one further back. Pretty sure the plate beside it is stamped "Engine Oil" or "Motor Oil" - similar, if not the same, bung.
     
  3. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,543
    Charleston, SC
    Full Name:
    Curt
    That's the front bolt. Remove and drain!
     
  4. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,454
    Dublin, Ireland
    Full Name:
    Greg
    #4 FerrariDublin, Apr 1, 2014
    Last edited by a moderator: Sep 7, 2017
  5. cm2

    cm2 Formula 3

    Sep 26, 2012
    1,451
    SF Bay
    Full Name:
    Nathan
    Manual has pics too, I think. Just don't re-torque to the specs indicated in the manual :)
     
  6. Falcon Wing

    Falcon Wing Formula 3

    Aug 4, 2010
    1,294
    Colorado Springs
    #6 Falcon Wing, Apr 1, 2014
    Last edited: Apr 1, 2014
    Thanks. The cover on the belts threw me a bit. (already knew where the first bolt was)
     
  7. BrettC

    BrettC Formula 3

    Aug 13, 2012
    2,116
    Calif
    Full Name:
    Brett
    Hey Falcon wing...see the line in yellow across the bolt? When I tightened mine I was able to exactly match the torque using the line and presto...no leaks...use a new washer though! Doing the transaxle too?
     

Share This Page