News

360 Leaking clutch control tube Gated Manual

Discussion in '360/430' started by BrettC, Sep 28, 2019.

  1. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,272
    Calif
    Full Name:
    Brett
    I think I have isolated the leak on my clutch to the line that connects to the distribution block in the rear of the car. Any way to stop a leak at the block where it screws in? I am thinking a thread sealer but I could always replace the part. I will have it on the lift with the wifey pumping the clutch to verify but seems the seeping is their. Any experiences with this? Thanks!!
     
  2. To remove this ad click here.

  3. BrettC

    BrettC Formula 3

    Aug 13, 2012
    1,272
    Calif
    Full Name:
    Brett
    Also, I have changed the block to Hill parts so I do not believe that the block is leaking. It is a small tube that runs into the transaxle from the block. #31 on the Ricambi website but they show it unavailable. Rutlands has it. thanks
     
    24000rpm likes this.

Share This Page