Licence plate mount

I have one of the early carbonio Roma frames. It mounts easily with no screws BUUUUT, I found it interfered with the front parking sensors and caused the rear sensors to be flaky because the front were getting reflections. Removed the plate and no sensor problems! I mucked with the design and made it better but I still have slow responding rear sensors so I think I’m still getting reflections.

Also, the pressure tabs are below the mount so it artificially lowers the front making it scrape the holder on my entry to the road. Worn down a fair amount of metal of the holder this way.

‘Still mulling a better solution.

SV

 

I think this is how it goes, blue tooth your phone on choose phone only, that is if you have a separate music player, blue tooth the music player as music only, click media/source and choose your music player, sometimes it’s seems necessary to reconnect your blue tooth device every time you start it, it was the alarm that drove me nuts, and the sat nav. when I asked it to take me to Cambridge the 1. Suggestion was somewhere in Italy.

Yours looks very nice.

 

I have the Carbonio no-drill frame also and have not had any problems with the front parking sensors. The sensors can detect higher up things like other cars or walls. Occasionally, I get a blip for something lower like a curb when parking, but not with any regularity or consistency. I wonder if you have the same experience or perhaps your front parking sensors are angled downwards (towards the license plate).

I have the same experience with bottom of the Carbonio frame scraping the ground. I seem to remember someone with a different (no-drill) plate mount, but have not been able to find it. It involved a pair of "L" shaped mounts with the bottom of the L taped (with double sided tape) to the front splitter and the side of the L taped to the license plate. You would not be able to remove your front plate at will. When I purchased the Carbonio frame, I liked the idea of being able to remove Carbonio frame for photographs, but in practice, I have just left it on.

 

Hello Dan,
congrats for the car, stunning, is it Rosso...Portofino?

 

Congrats on the new Roma! I'm looking for a front license plate holder too, could you please message me (I couldn't message you via your profile page). Thanks.