LICENSE PLATE MOUNTING | FerrariChat
Buy

LICENSE PLATE MOUNTING

Discussion in '308/328' started by Kvnhpnr, May 3, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Kvnhpnr

    Kvnhpnr Karting

    Jan 7, 2022
    59
    Pennsylvania
    Full Name:
    Kevin Scott Hepner
    #1 Kvnhpnr, May 3, 2023
    **Please Help** I recently transferred from Sicily to Pennsylvania and brought my 1986 328 GTS with me. I have to register it in the state and need to change the mounting from euro to US. The euro mount was drilled into the body and the holes don't line up with the universal mount that I bought. Is there an easy way to mount the plate without drilling or will I have to drill more holes? Will strong magnets work if needed to go that route?
     
  2. Jack-the-lad

    Jack-the-lad Seven Time F1 World Champ
    Owner Silver Subscribed

    Jun 22, 2004
    78,363
    Danger Close at Moot Pointe, Gulf of America
    #2 Jack-the-lad, May 3, 2023
  3. waymar

    waymar Formula 3

    Sep 2, 2008
    1,354
    Northeast, PA - USA
    Full Name:
    Wayne Martin
    #3 waymar, May 3, 2023
    Pennsylvania only requires a rear plate.
     
  4. dave80gtsi

    dave80gtsi Formula 3
    Silver Subscribed

    Nov 3, 2003
    1,924
    Ohio
    Full Name:
    Dave Meredith
    #4 dave80gtsi, May 3, 2023
    Buy a piece of, say, 6 mm thick aluminum in the size of your Euro plate. Drill and tap the aluminum so to match your new US plate's hole pattern. Then thru hole drill the aluminum so to match the Euro plate sized holes already in your car. Paint the aluminum in whatever color you wish, and then mount it to the car via the Euro holes. Finally, attach your US plate to the aluminum with short bolts which will not protrude past the backside edge of the aluminum. Done!
     

Share This Page