348 - Lift point dimensions | FerrariChat
Buy

348 Lift point dimensions

Discussion in '348/355' started by Huskymaniac, Apr 4, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Huskymaniac

    Huskymaniac Formula Junior

    Jul 9, 2020
    281
    Finger Lakes, NY
    Full Name:
    Tony
    #1 Huskymaniac, Apr 4, 2021
    Does anyone know the width and depth between the 4 corners representing the lift points. I am shopping for a lift again and need these dimensions to make sure what I buy can access them.
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,394
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Apr 4, 2021
    308 GTB likes this.
  3. Huskymaniac

    Huskymaniac Formula Junior

    Jul 9, 2020
    281
    Finger Lakes, NY
    Full Name:
    Tony
    #3 Huskymaniac, Apr 4, 2021
     
  4. Huskymaniac

    Huskymaniac Formula Junior

    Jul 9, 2020
    281
    Finger Lakes, NY
    Full Name:
    Tony
    #4 Huskymaniac, Apr 17, 2021
    Yes. I got under there today, or tried, and got a rough estimate of 35" front to back and 58" side to side. I originally missed that there were those inverted U-shaped jack points on the back too.
     
  5. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,394
    Sydney
    Full Name:
    Ian Riddell
    #5 Qavion, Apr 18, 2021
    According to the manual, the wheelbase is is 96 inches. I didn't realise the jacking points were so close to each other (compared to the wheelbase). The front track dimension was pretty close... 59 inches.
     
  6. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,026
    NE FL
    Full Name:
    Ken
    #6 kenneyd, Apr 18, 2021
    You really should never use the factory rear location when on a lift... It's just too unstable to wrench on.
    Pushing the rear arms ~18" further back to the frame location provides much more stability.
     
  7. Huskymaniac

    Huskymaniac Formula Junior

    Jul 9, 2020
    281
    Finger Lakes, NY
    Full Name:
    Tony
    #7 Huskymaniac, Apr 18, 2021
    Does that prohibit you from dropping the engine? Maybe it make sense to get a couple of those column style jack stands to put under the rear frame points after it is jacked up?
     
  8. kenneyd

    kenneyd Formula 3

    Sep 30, 2014
    2,026
    NE FL
    Full Name:
    Ken
    #8 kenneyd, Apr 18, 2021
    I suppose some people might use the cradle as a jacking point, but they're actually points on the frame before the cradle that you use. They have no effect on dropping the motor.
     

Share This Page