Little black grille screws 20297602

I dropped one and it disappeared in my front trunk area.

After considerable hunting, I was not able to locate a screw with this larger head size. I used a smaller head screw from Bel Metric (indeed it is M5), with a washer.

Would be good to find a source.

 

https://belmetric.com/m5-phillips-truss-head-stainless-steel-jis-b-1111/?sku=SLH5X12SS

Have a paint brush?

 

The finish is very specific and if keeping the car at concorso level, painting screws or half baked alternatives always detract points. I did find these in ebay and were quite acceptable. Nonetheless, if possible order from Ferrari and keep the receipts in the car binder to show they are factory issued. These cars are always worth keeping as nice as possible.
Image Unavailable, Please Login

 

Well I am an Honors level judge with the FCA, judged at Cavallino for many years and was formerly an IAC/PFA board member who was one of the ones making judging rules and my other half is Chief Judge for FCA. I do not agree with your assessment.

 

Head is not as wide as the OEM screw.

 

Ben, I hear you! Brian (Rifledriver) is right in disagreeing with my assesment, but I'm an incurable preservationist. Just happened last month with some trunk lid panel clips. I do recall in a concorso a judging discussion about the rivets that also hold the hood grille. They should be blind, meaning that the bottom end is closed, and are black; someone did noticed they were not correct, acceptable, but not as done at factory. BTW, Congrats on the Huntington Award, being OCD pays Your car does look gorgeous.

 

I would rather drive mine!

 

I have 5 spare. Replated in “ blond.”
( wink) super rare.
Image Unavailable, Please Login

 

Six are required, don’t drop any of these.
Image Unavailable, Please Login