Look right for a tool kit | FerrariChat

Look right for a tool kit

Discussion in 'Mondial' started by uberlink, Sep 9, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. uberlink

    uberlink Formula Junior

    Apr 23, 2012
    777
    Twin Cities, MN
    Full Name:
    Mark Johnson
    Looking at purchasing this tool roll/set to replace the missing set from my 1986 Mondial 3.2. Does this look right for my car? Complete? Authentic?

    Thanks.

    [​IMG][​IMG]
     
  2. Alden

    Alden F1 Rookie
    Rossa Subscribed

    Apr 25, 2010
    3,604
    Central Florida
    #2 Alden, Sep 9, 2015
    Last edited by a moderator: Sep 7, 2017
    I am not an expert but here is a pic of my too roll from my 1988 3.2.

    I am missing the emergency window crank and you are too.

    You are also missing the spark plug tool you can see in the far right in mine.

    Can' t see if your screwdrivers say Ferrari on the or not, they should.

    Your tow eye looks different than mine, not sure if yours is correct or not. I am also not sure if the tow eye is supposed to go in the tool roll or the jack kit.

    Do you have the jack kit with jack, belts, bulbs, plugs and lug nut tools?

    Do you have the tool roll pouch itself?

    Also,PM me if you want a nice usable tool roll full of useful tools that you can take with you and use without fear of loss or damage, I make them up.
    Alden
    Image Unavailable, Please Login
     
  3. uberlink

    uberlink Formula Junior

    Apr 23, 2012
    777
    Twin Cities, MN
    Full Name:
    Mark Johnson
    What do your wrenches say?
     
  4. uberlink

    uberlink Formula Junior

    Apr 23, 2012
    777
    Twin Cities, MN
    Full Name:
    Mark Johnson
    Here is the roll:

    [​IMG]
     
  5. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,083
    FRANCE
    "wrong roll" for a 3,2 to me, Mark: the pliers are in the Spark Plug Tool pocket, and to the left of that pocket there should be one large pocket for the pliers, not two small ones. Of course the 12mm spark plug tool is missing, it should be in the pocket where the pliers are.
    I strongly suspect the tool roll itself of being "two valve injected" vintage, perhaps early QVs, this due to the absence of the large pocket for the pliers.
    Screwdrivers with the handle not marked "Ferrari" and wrenches that do not seem to be "Chrom Vanadium Kravm" (unless I'm mistaken?) would be further proof of an earlier vintage than a 3,2 tool kit.
    Rgds
     
  6. uberlink

    uberlink Formula Junior

    Apr 23, 2012
    777
    Twin Cities, MN
    Full Name:
    Mark Johnson
    Alden and Nerofer: I really appreciate the input. Thank you. This is a set I was considering buying to replace the set that was missing from my 3.2 when I bought the car. I will pass on this set and keep looking.
     
  7. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,083
    FRANCE
    Mark,

    Note that the tool roll posted by Alden is identical in every respect to the standard 328 tool roll. Hardly surprising as they share the same engine...EXCEPT for the tow hook that the 328 tool roll does not have (328 do not need one, they have a tow ring welded on the chassis).
    So a 328 tool roll plus a tow hook and you are good also...
    Rgds
     
  8. uberlink

    uberlink Formula Junior

    Apr 23, 2012
    777
    Twin Cities, MN
    Full Name:
    Mark Johnson
    Good to know. Thank you.
     

Share This Page