Does anybody know where to get these AMP connectors? I just looked everywhere but couldn't find them. Thanks
Sorry, but I don't need this amp connectors. I'm searching for the bayonet nut connector - the connector from the "door" wiring loom to the "car".
I have seen one that is very similar but i am not sure in a Alfa Romeo 166 on the rear doors maybe worth a look.
The connector of the Alfa 166 isn't the same. I also asked a Fiat / Alfa Dealer, but he couldn't remember any car with that connector. I will take a picture of the connector, perhaps this part may be used somewhere else.
Do you need the entire connector? You can certainly buy and replace individual pins (I've just done a couple on mine). ETA : An alarm guy told me that it looked exactly the same as a Fiat Punto - don't know if that's true though.
Yes, I need the entire connector - I replaced every pin (both sides) but there is one (or to be honest two) pin/s that doesn't fit the way it should:-(
Aren't there spare/empty/unused holes in the connector? It doesn't matter which hole you use, as long as the wire matches side per side.
There are enough empty holes, but I would also like to have a set of new or very good used ones for replacement. I have a second wiring loom for the driver door without connector that needs to complete as "spare part" for our 348.
Have you tried these guys? http://download.siliconexpert.com/pdfs/2010/10/3/16/11/53/994/tyc_/manual/eng_cs_82021_cpc_sections1-5_0807.pdf
