Looking for a part | FerrariChat

Looking for a part

Discussion in '308/328' started by ferrariowner, Jun 5, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ferrariowner

    ferrariowner Formula 3

    Joined:
    Feb 21, 2014
    Messages:
    1,155
    Location:
    Mansfield, TX
    Full Name:
    Ron
    ferrariowner, Jun 5, 2023
    #1
  2. Cameron Henlin

    Cameron Henlin Karting Silver Subscribed

    Joined:
    Jul 3, 2020
    Messages:
    151
    Location:
    Roseburg OR
    Full Name:
    Cameron Henlin
    Looks like a pretty standard union fitting. Check the thread on each side and you should be able to come up with something pretty quickly.
     
    Cameron Henlin, Jun 5, 2023
    #2
  3. Cirorsi

    Cirorsi Formula Junior Rossa Subscribed

    Joined:
    Nov 10, 2016
    Messages:
    790
    Location:
    Louisiana / Lac du Saint Sacrement, NY
    Full Name:
    Steven
    Ferrparts shows one for $79.33. Maybe they haven’t updated their web inventory?
     
    Cirorsi, Jun 5, 2023
    #3
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ Lifetime Rossa

    Joined:
    Jan 11, 2001
    Messages:
    26,885
    Location:
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    I think that photo and name are a little misleading as, I believe, that's the oil dipstick union (so is fairly large and will have some sort of special female seat shape machined into the larger end to accept, and seal, with the spherical end of the dipstick tube. Your photo is from MPC, and they show an "alternative" part available -- not cheap, but is that one also not really available?
     
    Steve Magnusson, Jun 6, 2023
    #4
  5. Rifledriver

    Rifledriver Three Time F1 World Champ

    Joined:
    Apr 29, 2004
    Messages:
    37,136
    Location:
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    I'd check with T Rutlands. They have a lot of used parts from parting out cars. Its not a high demand item.

    I'd ask for Brian Keegan. He works remotely but has most knowledge of cars of that period.
     
    Rifledriver, Jun 6, 2023
    #5
    BLACK HORSE and smg2 like this.
  6. 4redude

    4redude Formula Junior

    Joined:
    Jan 13, 2005
    Messages:
    732
    Location:
    Fungus Corner
    Full Name:
    Brian Keegan
    Sadly, if we have a used one is most likely still not unpacked out of the two semi trailers since the move from GA to WI at the end of July 2020.
    We do not have a new one in stock. I can tell you one side is 18 x1.5 thread pitch and the other side is 22 x 1.5 thread pitch.
    You might try: https://exoticautorecycling.com/
     
    4redude, Jun 13, 2023
    #6
  7. 85QVEuro

    85QVEuro Formula Junior

    Joined:
    Jan 15, 2021
    Messages:
    560
    Location:
    NYC
    Full Name:
    Joe
    85QVEuro, Jun 13, 2023
    #7
  8. smg2

    smg2 F1 World Champ Sponsor

    Joined:
    Apr 1, 2004
    Messages:
    16,359
    Location:
    Dumpster Fire #31
    Full Name:
    SMG
    smg2, Jun 13, 2023
    #8
    ferrariowner, Cameron Henlin and Steve Magnusson like this.
  9. Cameron Henlin

    Cameron Henlin Karting Silver Subscribed

    Joined:
    Jul 3, 2020
    Messages:
    151
    Location:
    Roseburg OR
    Full Name:
    Cameron Henlin
    I wonder if 5068L-15-18 on this page is the same: https://www.hydraulicsdirect.com/5068L-DIN-Light-X-Male-Metric-ES-Seal-p/5068l.htm -- it seems like those fittings are likely standard and these metric compression fittings seem about right based on your pictures. What do you think?
     
    Cameron Henlin, Jun 14, 2023
    #9
  10. ferrariowner

    ferrariowner Formula 3

    Joined:
    Feb 21, 2014
    Messages:
    1,155
    Location:
    Mansfield, TX
    Full Name:
    Ron
    ferrariowner, Jun 24, 2023
    #10
    miketuason likes this.

Share This Page