Looking for a restoration shop (on a budget) | FerrariChat
Buy

Looking for a restoration shop (on a budget)

Discussion in 'Chicago' started by farrbar, Mar 14, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. farrbar

    farrbar Karting

    Sep 28, 2006
    152
    Chicagoland
    #1 farrbar, Mar 14, 2011
    Last edited by a moderator: Sep 7, 2017
    I had Automotovive fever this weekend so I went to my storage garage to hang out for a little while, hadn't been there in a month ):

    This place is a mess, and I so I started clearing some stuff out. One of the spots is filled by my 1987 Jeep Grand Wagoneer, which I got it out and running. It has some minor issues, but is fun to drive, and most of all, reminds my of the good times I had in High School.

    The paint on this car drives me nuts, so I would really like to have it stripped to bare metal (some very minor metal repair needed on one fender), and then resprayed and a new set of faux wood (which I already have) applied. I realize that about 80% of every dollar spent on this car will not be recoverable in the event that I ever sell it. I want to keep the cost in-line. I think if this car had better paint, I would drive it more often, sounds silly, I know, but the fading and peeling become obvious at about 15 feet, I'd like to be more of a 2 footer.

    Can anybody suggest a decent local restoration/paint shop? Willing to spend a couple thousand, so hoping to go a step up from Earl Scheib/Macco, but can't justify a $10K paint job.

    Thanks in advance for your input.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. tifosi12

    tifosi12 Four Time F1 World Champ
    Lifetime Rossa Owner

    Oct 3, 2002
    49,633
    @ the wheel
    Full Name:
    Andreas
    #2 tifosi12, Mar 14, 2011
    I'd recommend Ed's affordable automotive repair in Palatine. He can do the restoration and he has a guy who does excellent paint jobs in the price range between Macco and 10k.

    If you visit Ed, he'll show you some of the paintjobs his guy did for him.
     
  3. amenasce

    amenasce Three Time F1 World Champ
    Silver Subscribed

    Oct 17, 2001
    34,457
    Full Name:
    Joe Mansion
    #3 amenasce, Mar 14, 2011
    A wax/buff wouldnt help?
     
  4. BDCVG

    BDCVG Formula Junior

    Apr 9, 2007
    262
    Cincyish
    Full Name:
    Brad
    #4 BDCVG, Mar 23, 2011
    With My Wagoneer the problem was finding the woodgrain decals large enough.
     
  5. zxttfan

    zxttfan Formula Junior

    Dec 11, 2009
    482
    St. Louis
    #5 zxttfan, Mar 23, 2011
    The Macco on Waukegan Rd in Palatine near the airport did a pretty good job with some older and classic cars when I worked for a dealer in Chicago several years back. As I recall the price was very reasonable. FYI, our own guys did most of the prep work (removing trim, etc) and the paint was put on a little thick which required a wet sand in areas when we got them back.
     
  6. It's Ross

    It's Ross Formula 3

    Jul 30, 2007
    2,028
    Barrington, Ill. USA
    Full Name:
    Ross
    #6 It's Ross, Mar 24, 2011
    I'll second Maaco as a good value to shoot the car, the caveat being do your own prep and either pay for upgraded or supply your own paint. A little palm grease for the actual painter on top of the $299 seemed to help my results the one time I did this.
     
  7. Dino V

    Dino V Formula 3

    Sep 21, 2005
    1,140
    Chicago
    Full Name:
    Dino
    #7 Dino V, Mar 24, 2011
    A&L autobody in Palatine. Talk to the owner Anthony.
     
  8. autowerks racing

    autowerks racing Karting

    Jul 16, 2008
    89
    #8 autowerks racing, Mar 25, 2011
    We have a full soda blasting room if you really want to strip it down to bare metal. Based on your budget I would recommend against that route as for we would need to dissassemble the entire vehicle. Judging by the pics the truck does not look that bad. Perhaps address your concerns, scuff and shoot would be the best route for your application.
    I am always happy to help. One step into the back of our shop, its like Jalopnik here, and you will see we love random projects
     
  9. farrbar

    farrbar Karting

    Sep 28, 2006
    152
    Chicagoland
    #9 farrbar, Mar 25, 2011
    I'll stop by some time and see you. Who should I ask for?
     
  10. autowerks racing

    autowerks racing Karting

    Jul 16, 2008
    89
    #10 autowerks racing, Mar 26, 2011
    Ask for Casey or Ron(me)
     
  11. silver1331

    silver1331 Formula Junior
    Silver Subscribed

    Feb 9, 2009
    521
    #11 silver1331, Mar 14, 2012
    Did you end up repainting the car? Curious how it turned out if so.
     
  12. farrbar

    farrbar Karting

    Sep 28, 2006
    152
    Chicagoland
    #12 farrbar, Jan 7, 2014
    Last edited by a moderator: Sep 7, 2017
    Okay - so it took a little longer for me to get started on this project, but I finally decided to do it. I appreciate the recomendations on here.

    I went with Autowerks in Northbrook. I have found Ron very easy to work with so far. They have had the car a few weeks now (I'm not in a major hurry). All of the trim, chrome, wipers, handles and glass has been removed. Body is being prepped, and will hopefully get some paint this week. Replacing all of the rubber and window gaskets.

    I was very pleased with how solid the car was once stripped down. I guess it pays to by one that has lived in the right part of the country.

    Hope to drive it more in 2014!
    Image Unavailable, Please Login
     
  13. sagekilz

    sagekilz Karting

    Aug 21, 2008
    96
    Bensenville, IL
    Full Name:
    Jeremy Sus
    #13 sagekilz, Jan 8, 2014
    Custom Cars in LaGrange
     

Share This Page