looking for an engine harness connector schedule (mondial 8) | FerrariChat

looking for an engine harness connector schedule (mondial 8)

Discussion in 'Mondial' started by Herman Ronald, Dec 2, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
    Hello,
    I'm looking for my Mondial 8 (1981) schematic for the engine harness connectors (the 2 connectors at the diagnostic plug) as I'm doing an engine swap.


    regards Ronald
     
  2. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,961
    Isle of man- uk
    I have the wiring diagrams for the 3.2 showing the diagnostic plug etc, but not sure what you are looking for. I can e mail it if any use
     
  3. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
    Hello Mike, Thanks for responding, I'm looking for which wires are on the pin's such as fuelpump, starter motor etc
    Image Unavailable, Please Login
     
  4. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
  5. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,961
    Isle of man- uk
    My mondial is long sold so cannot look under the bonnet.
    Steve Magnusson on here is the man you need to ask, i think he has a mondial engine as a coffee table
     
  6. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,797
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    No, that's not me.

    Unfortunately, I can't help you with this as I don't have a copy of the Mondial 8 wiring diagram book(s). Maranello Concessionaires shows that they have this available (and you are on their side of the Atlantic):

    https://www.ferrariparts.co.uk/part/ferrari/95990814?id=53334

    My guess is that this is specifically for 1981, and later, euro/standard version Mondial 8 (as they tended to write "US VERSION" on the cover and title page for the US version manuals, and write nothing about version on the cover and title page for the euro/standard version manuals in that era), but could still be fairly useful if you have a US version Mondial 8 chassis you are working with. In any case, they are the best people to contact to see if they have, or can get, the proper wiring diagram for your exact year/version Mondial 8 chassis. Good luck with project -- a restomod Mondial 8 -- we like!
     
  7. theunissenguido

    theunissenguido F1 Rookie
    Owner Silver Subscribed

    Jan 21, 2004
    2,668
    Argent/Brasil
    Full Name:
    Guido
    Herman Ronald likes this.
  8. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
  9. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
    Is the Ferrari 348 engine harness color code the same as the Ferrari mondial and multiple models color codes?


    1994 model 348 connector 115.

    White: starter signal wires (there may be two of these, but they join together past the connector).
    Yellow/green: to alternator
    Red: to alternator (plug-in terminal.)
    Green/white: to speedo sensor
    Red/white: to speedo sensor
    Grey/white: to sender for water temperature light
    Grey: to sender for water temperature gauge
    Grey/black: to sender for oil pressure gauge
    Grey/yellow: to sender for oil pressure light
    Green/black: to A/C compressor clutch

    source: Miltonian (Fchat)
     
  10. Herman Ronald

    Herman Ronald Karting

    Feb 23, 2014
    197
    Netherlands, Frl
    Full Name:
    Ronald
    Engine harness Mondial 8 colour code (1981) on the 9 pins plug (not the chassis connector!),
    but what functions are there on these color codes?
    Image Unavailable, Please Login
     

Share This Page