looking for BB512i 1/18th scale model | FerrariChat

looking for BB512i 1/18th scale model

Discussion in 'Collectables, Literature, & Models' started by parkerfe, Jan 30, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. parkerfe

    parkerfe F1 World Champ

    Sep 4, 2001
    12,887
    Cumming, Georgia
    Full Name:
    Franklin E. Parker
    I have a BB512 model but can't seem to find a BB512i one. I want one with the injected engine rather than the carburated one. Does anyone know where I can find one ?
     
  2. jelmer

    jelmer Karting

    Nov 20, 2003
    54
    Holland
    Full Name:
    J vd H
    as far as I know, there is no 512BBi made.
     
  3. ferraripete

    ferraripete F1 World Champ

    frank,

    i was in vegas a few months back and found a store in venician that had models. they had an allegretti built mini f2 car...simply lovely!

    they did also have a 1/18 boxer model that was made by kyosho (SP?).

    if you are resourcefull, you may be able to find one.

    good luck.

    pcb
     
  4. Doody

    Doody F1 Veteran

    Nov 16, 2001
    6,099
    MA USA
    Full Name:
    Mr. Doody
    the kyosho you saw was probably a 512BB not a 512BBi.

    are you sure it was a 512BBi?

    you could always call the Venetian, parkerfe. but isn't that an ExoticCar.com retail outlet? they don't sell a BBi (i just got my BB from them today).

    you might inquire with CavallinoModels (a board sponsor, i believe) and ask them about their customization programme - maybe their guy can build you one based on the BB model and other engine parts.

    doody.
     
  5. ferraripete

    ferraripete F1 World Champ

    doody,

    i think you are correct ...it was a bb.

    pcb
     

Share This Page