Looking for stock 328 muffler | FerrariChat

Looking for stock 328 muffler

Discussion in '308/328' started by 285ferrari, Dec 23, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,962
    Location:
    MD and NE
    Full Name:
    Robbie
    Checked the classieds, Ebay, etc. I need a stock 328US muffler. Having a custom muffler built and need the flange piece that connects to the cat and enters the muffler. I know this piece is welded on the muffler. Muffler guy said it is a little diffucult to reproduce with the type of exhuast gaskets used on these cars. Told me if I could find one and cut it off , would make the job alot easier and there would be no question about exhaust leaks, etc. Willing to buy a whole muffler if need be. Or if someone has a banged up muffler with the flange still intact-that would be good also. Any help or pointing me in a good direction would be appreciated. Thanks
     
  2. Mike C

    Mike C F1 Veteran Lifetime Rossa Owner

    Joined:
    Aug 3, 2002
    Messages:
    6,081
    Location:
    Southeast USA
    Full Name:
    Mike Charness
    I've got my original US 308QV muffler (identical to 328US)... was holding on to it since I normally keep all original parts, but heck, I'm never goin' back to stock. PM me with an offer if you'd like.
     
  3. 285ferrari

    285ferrari Two Time F1 World Champ Sponsor

    Joined:
    Sep 11, 2004
    Messages:
    20,962
    Location:
    MD and NE
    Full Name:
    Robbie
    Mike PM sent..
     

Share This Page