Lower Cam Drive part #'s | FerrariChat

Lower Cam Drive part #'s

Discussion in '308/328' started by PittsS2APilot, May 17, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PittsS2APilot

    PittsS2APilot Formula Junior

    Jun 29, 2007
    857
    Gulfport MS
    Full Name:
    Joe
    Can someone help me with part numbers for the lower cam drive? I need the SKF numbers for the bearings and seals for a 80 GTBi 2v? Can't seem to find them in the cross ref thread? Thanks Joe
     
  2. PittsS2APilot

    PittsS2APilot Formula Junior

    Jun 29, 2007
    857
    Gulfport MS
    Full Name:
    Joe
  3. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    I have the Ferrari Parts Books..... I don't know, do they show the SKF numbers??

    Maybe a quick call to Ricambi would be the fastest way.....
     
  4. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,325
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    #4 350HPMondial, May 19, 2010
    Last edited by a moderator: Sep 7, 2017
    I just finished that job..

    See,
    An extra set of REAL Italian SKF 308 front cover bearings.
    or, CAM DRIVE SEALED BEARING, 308/308i/308QV/512BBi/MOND. 8/QV (SKF# 6203/2RSJ)(OLD # 175260)
    About,,, $44.00 each.... from parts houses...... NOT!

    I will part with this extra set for a donation of 1/2 that, plus shipping.
    PM me.
    ;)

    Edwardo

    I got an X-tra, front cover, with internals,, 1979 car.
    All, seals too, cheap,.....
    ;)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  5. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,325
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    Hello,

    Hey joe,,
    where you goin wit dat,,, gun, in your hand....

    Hey Joe,
    PM or respond
    :-/

    Edwardo
     

Share This Page