Make your own 180072 siren cable | FerrariChat

Make your own 180072 siren cable

Discussion in '348/355' started by vincentf355, Oct 23, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. vincentf355

    vincentf355 Rookie

    Feb 24, 2010
    35
    Full Name:
    vincent tseng
    #1 vincentf355, Oct 23, 2017
    With connector AMP 1-967640-1 (siren side) and AMP 174259-2, you can make your own cheap siren cable 180072.

    As you may know, if your dead siren is earlier style (assembly number till 30998), you will need this 180072 cable to use GM siren.
     
  2. vincentf355

    vincentf355 Rookie

    Feb 24, 2010
    35
    Full Name:
    vincent tseng
    #2 vincentf355, Oct 24, 2017
    As for the female connector on the main harness, it is AMP 174257-2. You might want to check or replace the pin. Contact after years is an issue for me.

    Manufacturer document shows how to remove/extract the pin, if you do not want to cut the wire.

    Image Unavailable, Please Login
     
    Qavion likes this.

Share This Page