Mesh or Five Star Split | FerrariChat

Mesh or Five Star Split

Discussion in '360/430' started by D2-AUTOSPORT, Oct 31, 2008.

Thread Status:
Not open for further replies.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. D2-AUTOSPORT

    D2-AUTOSPORT Karting

    Oct 12, 2005
    111
    #1 D2-AUTOSPORT, Oct 31, 2008
    Last edited by a moderator: Nov 1, 2008
    Hey guys I'm going to putting a set of D2FORGED on a F430 Spyder 20s front 21s rear. I am at a toss up on which of these two styles to go with, help me out.

    Mesh VS1

    [​IMG]


    Five Star Split VS2

    [​IMG]

    or pick one of their other styles


    Thanks
     
  2. copterjon

    copterjon Formula 3
    Silver Subscribed

    Nov 11, 2005
    1,541
    Mesa, Az.
    I personally like the mesh VS1 wheel better, it's just more old school racy to me.
    I also like the the VS5.
    The toss up for me would be between these two. I'd just need to see 'em on the car but I'm sure I'd go with the mesh VS1.
    Good luck it's a tough decision.:)
     
  3. Fast_ian

    Fast_ian Two Time F1 World Champ

    Sep 25, 2006
    23,397
    Campbell, CA
    Full Name:
    Ian Anderson
    "You pays your money, and takes your choice!"...... FWIW, I also prefer the VS1. The VS2 is almost too close to the 360 OEM "Starfish" IMHO.

    I don't know if your username is a clue (!), but have you looked at OZ's? - I just put a set of superleggera II's on my car and love 'em.....

    Cheers,
    Ian
     
  4. D2-AUTOSPORT

    D2-AUTOSPORT Karting

    Oct 12, 2005
    111

    User name is a clue, This company (D2FORGED) is sponsoring a F430 to use it for media images and wanted to know which of these wheels would the ferrari community like to see on the car. BTW they are looking for more then one to sponsor
     
  5. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,523
    Campbell, CA
    Full Name:
    John Zornes
    The VS1 is better.
     
  6. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,523
    Campbell, CA
    Full Name:
    John Zornes
    Sorry to be a stickler here but some feedback on the site ---

    The site is pretty thin on any technical information, it looks like it was written by a marketing guy. It says you are filling a niche for exotic and high end cars but you don't have any specifics about your products.

    How much do the VS1's weigh. They are made from aircraft grade aluminum --- great but what kind? I assume they are forged because of your company name but that information is missing as well. What kind of fasteners? Available sizes? Tested to the 'highest standards' -- again great but what does that mean, what standards?

    Way to fluffy
     
  7. masar

    masar Formula 3

    Aug 19, 2007
    1,367
    Czech republic
    Full Name:
    Petr
    #7 masar, Oct 31, 2008
    Last edited: Oct 31, 2008
    VS1, however i would not put 21", its just too much, bigger does not mean better..... 20/19 combo is max IMO
     
  8. D2-AUTOSPORT

    D2-AUTOSPORT Karting

    Oct 12, 2005
    111
    #8 D2-AUTOSPORT, Oct 31, 2008
    Last edited: Oct 31, 2008
    I sent D2FORGED your post and this is their reply:

    So its seems like every one likes the VS1 is a favorite so far.
     
  9. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,523
    Campbell, CA
    Full Name:
    John Zornes
    Great response and thank you for not taking it as an insult. I appriciate the customer service.

    Sounds like an interesting product.
     
  10. Jdahlstrom

    Jdahlstrom Formula 3

    Feb 28, 2005
    1,184
    Miami, Fl
    Full Name:
    Josh Dahlstrom
    #10 Jdahlstrom, Oct 31, 2008
    Last edited: Oct 31, 2008
    Mesh VS1's FTW. If the car is black it would look good with gold centers.
     
  11. D2-AUTOSPORT

    D2-AUTOSPORT Karting

    Oct 12, 2005
    111

    From D2FORGED

     

Share This Page