messy draining coolant at the block. | FerrariChat
Buy

messy draining coolant at the block.

Discussion in '348/355' started by yelcab, Oct 30, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,671
    San Carlos, CA
    Full Name:
    Mitchell Le
    #1 yelcab, Oct 30, 2013
    If you have ever drained the coolant from the engine block of a 355, you know that it makes a huge mess on the floor and there is no way to catch it all. In addition to being messy, the coolant stuff is slippery as hell.

    Has anyone figured out a neat solution for this messy problem? A drain valve perhaps?
     
  2. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,792
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #2 plugzit, Oct 30, 2013
    I hate fluids!
    The el cheapo pump from Harbor freight includes a very small tube that can be used to get down to the bottom of the water pump and get most of the fluids. If you're really careful, you can pull a motor without any spills. I've done it once. Out of many.
     
  3. dkilka

    dkilka Formula Junior

    May 8, 2007
    289
    Australia
    #3 dkilka, Nov 1, 2013
    I know exactly what you mean! You can buy large coolant/oil catch trays. I used one of these when I drained the block a couple of weeks ago as part of the coolant drain process. Even with the catch tray (which is on wheels and can be turned through 90 degrees without spilling the fluid) I still got a shower! But 95% of the coolant was caught in the tray.
     

Share This Page