metal trunk emblem | FerrariChat
Buy

metal trunk emblem

Discussion in '360/430' started by skywalkermd, Mar 8, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. skywalkermd

    skywalkermd Karting

    Oct 30, 2013
    51
    #1 skywalkermd, Mar 8, 2014
    a friend noticed recently that metal Ferrari emblem on trunk somewhat bowed and lft attachment arm loose from body...remove bend and glue? back in or buy a new one and ?glue
     
  2. skywalkermd

    skywalkermd Karting

    Oct 30, 2013
    51
    #2 skywalkermd, Mar 8, 2014
    and is a 360
     
  3. mr_bock

    mr_bock Formula 3

    Oct 27, 2006
    1,373
    FL full time
    #3 mr_bock, Mar 8, 2014
    Maybe post a pix...
     
  4. fabo

    fabo Formula Junior

    Dec 14, 2013
    552
    Sydney
    Full Name:
    Fabo
    #4 fabo, Mar 9, 2014
    take the opportunity and replace it with a new one
     
  5. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    16,547
    Charleston, SC
    Full Name:
    Curt
    #5 vrsurgeon, Mar 9, 2014
    If you can remove it and straighten it then by all means do it. But.. IIRC they're a cast metal and I'll bet it cracks when you try to straighten it, or the chrome cracks on it juuuuust enough to annoy you ever time you look at it (My past Experience with Porsche emblems.. :( ). Easiest thing to do is remove it and put a new emblem on.
     
  6. SoftwareDrone

    SoftwareDrone F1 Veteran
    Sponsor Owner

    Jan 19, 2004
    7,861
    San Jose, California
    Full Name:
    Mike
    #6 SoftwareDrone, Mar 9, 2014
    I was considering running a small die over the plastic pins on mine and replacing those stupid spring steel push thingys with some nylon nuts so I could remove it at will to detail under, but I got caught up in other things.
     

Share This Page