Modified 348 Front Bumper | Page 2 | FerrariChat
Buy

Modified 348 Front Bumper

Discussion in '348/355' started by pdebe, Apr 15, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. group77racing

    group77racing Formula Junior

    Sep 5, 2006
    453
    Often Imitated
    Full Name:
    Never Duplicated
    #26 group77racing, Apr 20, 2008
    Last edited by a moderator: Sep 7, 2017
    Scott is correct, he has seen my car and I explained what had to be done to get these parts to fit "properly". ALL 348/355's have a very poor body gap at the front top bumper to nose panel gap. Go look at your cars and start comparing to others. I took the extra time to fill in the uneven gap and tighten the gap tolerance. Rear 355 bumper is about 1 inch wider per side at the outer most edge. It had to be modified to get it to look correct. I like it, it gives the car a wider look vs. the stock 348 bumper. The front AC unit gets air from the 355 brake duct in the grill, no mods. Also, 355 front bumpers have better ground clearance vs. 348 bumpers. I knocked off the 348 lip one to many times, so I switched. After I switched I was able to lower the car 1 inch and it still doesn't scrape.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. pdebe

    pdebe Guest

    Apr 15, 2008
    39
    Full Name:
    .
    #27 pdebe, Apr 21, 2008
    Can you please explain whats needed to make the 355 front bumper fit properly to avoid the gap b/w the bumper and nose panel?
     
  3. tactical

    tactical Guest

    Jan 23, 2008
    857
    #28 tactical, Apr 21, 2008
    Yep, buy a 355 because they fit perfectly:D





    Sorry could not resist that one:D
     
Page 2 of 2

Share This Page