modular rims on 355

I have a set of the modulars on my 91 348 and a set of the star rims on my 94 348.
I bolted them straight on and they look and work perfectly. Some will tell you the rears need a little shaved off to get them under the fenders more but I like the wider stance look. I'd put them on first and see how you like them before going through the trouble of machining them.

I know you're asking about a 355 but, On the 348 I was told to use a shorter lug in the rear with the modulars because the stock length would go too far and rub the caliper so I got the shorter ones, on the 94 the star rims are on with the stock lugs and there are no clearance issues. I don't think you actually need the shorter lugs unless you start machining off the inside of the rim.

If I was home right now I would honestly go out and swap the modulars on to my 355 and take some pictures for you. I'd like to see how they look too.

 

So something like this
PO bought and installed these, front are stock and rears have 15mm shaved off.
Not certain if these are the 355or 360 lug bolts.
Image Unavailable, Please Login

 

Another pic
Image Unavailable, Please Login