Mondial - FD and Spark Plug Wires - questions | FerrariChat
Buy

Mondial - FD and Spark Plug Wires - questions

Discussion in 'Mondial' started by aleib, Jan 19, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. aleib

    aleib Karting

    Oct 12, 2022
    141
    Full Name:
    Alejandro Leib
    #1 aleib, Jan 19, 2023
    Hi,
    i have two items in one thread, simple ones:
    1) FD has the CO mix screw hole... I could not rotate the screw yet (cant find a long 3mm hex that fits with the correct angle)
    but there should not be a sealing cap there? I put some fuel on it... and entered the FD without issues... so if fuel can get in, air too... so this is a air leak for sure.
    Please confirm.

    2) also, i was swapping spark plug wires, and found the rotor cap and wires are numbered 1-4, but when the wires go to the plugs, they go 1-4 2-3, 3-2 and 4-1.. .inverted... is that ok?
     

    Attached Files:

  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,826
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Jan 19, 2023
    Last edited: Jan 19, 2023
    Yes -- even a simple rubber stopper would suffice (and you'll probably have to retweak the idle RPM speed and the idle mixture if those were originally set with it missing). This is a typical one (that you should be able to find -- search Volvo and VW parts suppliers):
    Image Unavailable, Please Login

    Maybe a supplier mismade/mislabeled those spark plug wires -- the cyl #1 wire has to be the longest wire and the cyl # 4 the shortest wire. If it's running well, I wouldn't worry about it.
     
    ellum likes this.
  3. aleib

    aleib Karting

    Oct 12, 2022
    141
    Full Name:
    Alejandro Leib
    #3 aleib, Jan 19, 2023
    ok BAD to know I had an air leak all this time :(

    the 1-4 labels are in synch with the distributor cap numbers...

    so distributor cap and valve covers are the issue, not the wires itself
     

    Attached Files:

  4. aleib

    aleib Karting

    Oct 12, 2022
    141
    Full Name:
    Alejandro Leib
    #4 aleib, Jan 20, 2023
    ok found I took the wrong wire set... both are labeled 1-4 but one is inverted in lengths :)
    why not use 1-8 instead ot two 1-4 labels is a mistery :)
     
  5. afterburner

    afterburner F1 Rookie
    Silver Subscribed

    Jun 20, 2008
    3,471
    Switzerland
    Full Name:
    Urs STEMMLER
    #5 afterburner, Jan 21, 2023
    Cost.
     
  6. aleib

    aleib Karting

    Oct 12, 2022
    141
    Full Name:
    Alejandro Leib
    #6 aleib, Jan 24, 2023
    hhaha well, just purchased the plug, and engine is working better every day... :) thanks for the help
     
    afterburner likes this.
  7. jlc308

    jlc308 Karting

    Jul 11, 2009
    121
    Irvine CA
    #7 jlc308, Jan 27, 2023
    May I ask where you bought the plug? Thanks
     
  8. aleib

    aleib Karting

    Oct 12, 2022
    141
    Full Name:
    Alejandro Leib
    #8 aleib, Jan 27, 2023
    Deloreango.com
     

Share This Page