Mondial Hoses

Discussion in 'Technical Q&A' started by Philjay50, Jun 8, 2004.

  1. Philjay50

    Philjay50 Formula Junior

    Jan 16, 2003
    Chester, England
    Full Name:
    Has anybody changed the coolant hoses on a Mondial. The engine bay and front radiator looks easy but the pipes that run underneath seem to disappear into a void and I cannot get at the clips.
    The only thing I can think is that you have to disconnect them all and then shuffle the ally pipes back and forth to get the rubber one's on ?
  2. To remove this ad click here.

  3. slewman

    slewman Karting

    May 4, 2004
    Remove the coolant pipes at the front and the coolant pipes between the fuel tanks at the rear. Pull the rubber hoses one at a time thru the center chassis tube out towards the front. Coat the new hoses with talcom powder on the outside to prevent binding on install. I have seen these hoses fall apart from the inside and plug radiators.

Share This Page