Mondial offset | FerrariChat

Mondial offset

Discussion in 'Mondial' started by Shark49, Jun 16, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Shark49

    Shark49 Formula Junior

    Mar 31, 2005
    773
    Boone, NC
    Full Name:
    Nathan
    #1 Shark49, Jun 16, 2006
    Will wheels that are 210mm wide and the backspace of 125mm which would make the wheel offset 20mm fit on my mondial3.2 hubs?.
     
  2. Javelin276

    Javelin276 Formula Junior

    Jan 16, 2005
    512
    Idaho
    Full Name:
    Thor Zollinger
    #2 Javelin276, Jun 17, 2006
    Yikes... My original TRX wheels were a 55mm Offset. 20mm is too low. They'll scrape in the front wheel wells. The rears might be OK.

    I went with the following:
    17"x7.5" Rims, 4.25" Bolt Circle, 40mm offset
    17" 245 45 Rear
    17" 215 50 Front

    Thor
    www.JavelinArt.com
     
  3. Shark49

    Shark49 Formula Junior

    Mar 31, 2005
    773
    Boone, NC
    Full Name:
    Nathan
    #3 Shark49, Jun 17, 2006
    Now I am confused because I found a thread here that said the pre-abs mondial3.2 had an offset of 11mm..
     
  4. snj5

    snj5 F1 World Champ

    Feb 22, 2003
    10,213
    San Antonio
    Full Name:
    Russ Turner
    #4 snj5, Jun 17, 2006
    all mondials have the same offset, with or without abs
    all mondial wheels are interchangable, all years
     
  5. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
    #5 Birdman, Jun 17, 2006
    No, you are thinking of the 328. Early 328s had the same offset as the 308 but the later ones had a larger offset and the wheel design was changed to accomodate it.

    Birdman
     
  6. ckracing

    ckracing Formula Junior

    May 20, 2006
    728
    Jacksonville,Florida
    Full Name:
    Charles
    #6 ckracing, Jun 18, 2006
    Will 9x17 inch 348 wheels fit my 81 Mondial, with no modifications and stock wheel bolts?
    Does anyone have a right rear 9x17 inch 348 wheel???

    thanks
    Charles
     
  7. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
    #7 Birdman, Jun 18, 2006
    Charles, 348 wheels bolt right on to the Mondial, no problemo. I can tell you this for absolute certain, since we have a set on our Mondial. You need the wheel bolts that came with the 348 wheels, not the ones on the Mondial wheels. (348 wheel bolts are longer because the 348 wheels are "thicker").

    Birdman
     

Share This Page