mondial qv relays help | FerrariChat

mondial qv relays help

Discussion in 'Mondial' started by mondial, Jan 20, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mondial

    mondial Rookie

    Nov 12, 2003
    24
    I have had problems with the fuse box on the mondial qv and like a idiot I did not take a photo of the relay positions because I have a work shop manual and a wiring diagram and the drives manual book but the all seen to be different I would like to know if any one could write down the sequent to the relays or take a good photo thank you in advance
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,620
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    Please give your exact Mondial QV model (3.0 or 3.2?), year, and version.

    The OM relay figure for your exact year/model/version is also a reference that you should use/check/compare.
     
  3. mondial

    mondial Rookie

    Nov 12, 2003
    24
    hi steve its a 3 litre qv 1985 coupe uk model thank you
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,620
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    OK (I can't help with a photo, but wanted to make sure that someone didn't send you a photo of the wrong version).

    Do you have a copy of the 241/82 euro(standard) Mondial 3.0 QV OM available? If not, give a shout, and I'll post the relevant relay pages.
     
  5. mondial

    mondial Rookie

    Nov 12, 2003
    24
    #5 mondial, Jan 20, 2008
    Last edited by a moderator: Sep 7, 2017
  6. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,620
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #6 Steve Magnusson, Jan 20, 2008
    Last edited by a moderator: Sep 7, 2017
  7. jeffQV

    jeffQV F1 Rookie

    Feb 13, 2004
    2,976
    NZ
    Full Name:
    jeff
    does anyone know what is happening to the new fuse boards?
     

Share This Page